AEG FAV5270VI Uživatelský manuál stáhnout pdf (Strana 10)

Operating instructions

Adjust the water softener

To avoid the scale deposits on the dishes and in the dishwasher, the

dishes must be washed with soft, i.e. low lime content, water. The dish-

washer therefore has a built-in water softener, in which tap water from

hardness of 4 °d (German degree) is softened with the aid of special salt.

You water supplier will be able to inform you on the hardness and

hardness range of the water in your area.

0 Adjust the water softener to the setting that corresponds to the hard-

ness of the water in your area. The water softener can be adjusted in

10 steps.

0 1. Press and hold down the water softener button and press the ON/OFF

switch

– The water softener button indicator starts to flash.

– The number of flashes corresponds to the hardness setting. (Excep-

tion: hardness setting 0 is indicated by 10 flashes).

– The sequence of flashes is repeated after a 5 second pause.

2. Pressing the water softener button

increases the hardness setting by 1.

(Exception: hardness setting 0 follows hardness setting 9).

3. When the hardness setting is correct, press the ON/OFF switch

The hardness setting is then saved.

Water Hardness

in °d

) in mmol/l

)Range

1)(°d) German degree, measure of the hardness of water

2)(mmol/l) millimol per litre, international unit for the hardness of water

*factory setting

Adjust

to Hardness Setting

Number of

Flashes

41-50

35-40

31-34

27-30

23-26

7.3-9.0

6.3-7.2

5.5-6.2

4.8-5.4

4.1-4.7

19-22

15-18

3.3-4.0

2.6-3.2

III

11-14 1.9-2.5 II 2 2

4-10 0.7-1.8 I/II 1 1

under 4 under 0.7 I

no salt necessary

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Komentáře k této Příručce

Žádné komentáře

AEG FAV5270VI Uživatelský manuál Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Myčky nádobí AEG FAV5270VI