AEG 381 D Specifikace stáhnout pdf (Strana 23)

B1.3 PCS connection to the programmable controller

1. Set the DIL-switches 8 and 9 at the rearside of the 090/095/900 PCS to OFF.

Nothing needs to be changed for the 9000 PCS.

2. Load the corresponding software into the programmable controller and set DIL

switches 5 and 6 or the PCS rotary switch correspondingly.

3. Switch off the PCS and then on again (power reset). At least, the ERR LED must

light now.

4. Connect the programming interface of the programmable controller to the PCS

using the PCS 778 cable. If you have activated the SYNC operation, then you

should set the programmable controller restart input to 1.

5. Now, the ERR LED is deactivated at the PCS.

First commissioning

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

Žádné komentáře

AEG 381 D Specifikace Strana 23