AEG HG795840NB Uživatelský manuál stáhnout pdf (Strana 15)

To replace the connection

cable use only H05SS-F T180

or equivalent type. Make

sure that the cable section is

applicable to the voltage

load and the working

temperature. The yellow/

green earth wire (B) must be

approximately 2 cm longer

than the live and neutral wire

(A).

A B

1.

Connect the green and yellow (earth)

wire to the terminal which is marked

with the letter 'E', or the earth

symbol , or coloured green and

yellow.

2. Connect the blue (neutral) wire to the

terminal which is marked with the

letter 'N' or coloured blue.

3. Connect the brown (live) wire to the

terminal which is marked with the

letter 'L'. It must always be

connected to the network phase.

There must be no cut or stray strands

of wire present. The cord clamp must

be correctly attached to the outer

sheath.

8.6 Building In

min. 600 mm

min. 55 mm

min. 650 mm

560 mm

490 mm

min. 150 mm

30 mm

CAUTION!

Install the appliance only on

a worktop with flat surface.

8.7 Possibilities for insertion

The panel installed below the hob must

be easy to remove and let an easy access

in case a technical assistance

intervention is necessary.

The burner flame may be

extinguished by an air flow,

if the removable panel is not

installed. The air flow may

occur when you open or

close the cabinet door or

drawer.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Komentáře k této Příručce

Žádné komentáře