AEG HG755820UM Uživatelský manuál stáhnout pdf (Strana 11)

WARNING!

Let the flame spreaders cool

down before you clean

them.

Light stains:

Wash the flame spreader with warm

water and soap and dry it with a soft

cloth.

Medium stains:

Use the dishwasher. Place the flame

spreader on the bottom rack in a flat

position, with the top side up.

Heavy stains:

Clean the flame spreader with warm

water and soap, then wash it in the

dishwasher. If the stain is still present

wash the top of the flame spreader with

a grill cleaner and run through the

dishwasher again.

Use a toothpick to clean the holes of the

flame spreader.

6.6 Cleaning the spark plug

This feature is obtained through a

ceramic ignition candle with a metal

electrode. Keep these components well

clean to prevent difficult lighting and

check that the burner crown holes are

not obstructed.

6.7 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the

conditions of the gas supply pipe and

the pressure adjuster, if fitted.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

There is no spark when you

try to activate the spark gen-

erator.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply.

The fuse is blown. Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali-

fied electrician.

Flame spreader is placed in-

correctly.

Place the flame spreader

correctly.

The flame extinguishes im-

mediately after ignition.

Thermocouple is not heated

up sufficiently.

After lightning the flame,

keep the knob pushed for

equal or less than 10 sec-

onds.

The flame ring is uneven. Flame spreader holes are

blocked with food residues.

Make sure that the flame

spreader is clean.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Komentáře k této Příručce

Žádné komentáře