AEG HG654320NM Uživatelský manuál

HG654320NMIE GB ENGAS HOB USER MANUAL

This hob is designed to be connected to a 230 V 50 Hz AC electrical supply.Before switching on, make sure the electricity supply voltage is the same a

Replacement of the connection cableTo replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure thatthe cable section is appli

b) Space for connectionsKitchen unit with ovenThe hob recess dimensions must obey the indication and the kitchen unit must be equippedwith vents to le

OPERATIONIgnition of the burnerWARNING!Be very careful when you use open fire in kitchen environment. Manufacturer decline anyresponsibility in case m

If the burner accidentally goes out, turn the control knob to the off position and try to lightthe burner again after minimum 1 minute.The spark gener

CARE AND CLEANINGWARNING!Switch the appliance off and let it cool down before you clean it. Disconnect the appliancefrom the electrical supply, before

Cleaning of the spark plugThis feature is obtained through a ceramic ignition candle with a metal electrode. Keepthese components well clean to preven

Labels supplied with the accessories bagStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO

TOTAL POWER: G20 (2H) 20 mbar = 8 kWG30 (3+) 28-30 mbar = 567 g/hG31 (3+) 37 mbar = 557 g/hElectric supply: 230 V ~ 50 Hz3 core flexible cable with no

please contact your local council, your household waste disposal service or the shop whereyou purchased the product.Packaging materialThe packaging ma

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

www.aeg.com/shop 397201801-B-052011

CONTENTS4 Safety information6 Installation12 Product description13 Operation14 Helpful hints and tips15 Care and cleaning16 What to do if…17 Technical

SAFETY INFORMATIONWARNING!These instructions are only valid in the countries whose symbols appear on this booklet'scover.For your safety and cor

• Pots must not enter the control zone.• Do not use not stable cookware to prevent from tilt and accident.• Do not put flammable products or items tha

• This appliance is not connected to a combustion products evacuation device. It must beinstalled and connected in accordance with current installatio

Important safety requirementsThis hob must be installed in accordance with the Gas Safety (Installation and Use) Regula-tions (Current Edition) and th

1231 End of shaft with nut2 Washer3 ElbowConnection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or cop-per.The connec

1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.4. With a thin screwdriver, adjust the by-pass screw position.11 The