AEG FFB62700PM Uživatelský manuál

USER MANUALEN User ManualDishwasherFFB62700PWFFB62700PM

the indicators , , and flash and the display is blank.6.2 The water softenerThe water softener removes mineralsfrom the water supply, which would h

automatically released during the hotrinse phase.When the rinse aid chamber is empty,the rinse aid indicator is turned onnotifying to refill rinse aid

How to deactivate AirDryMake sure the appliance is in user mode.1. Press Option.• The indicators , and are off.• The indicator stillflashes.• The

°C for at least 10 minutes during the lastrinsing phase.How to activate ExtraHygienePress Option until the indicator is on.The display shows the upd

8.2 How to fill the rinse aiddispenserABCCAUTION!Only use rinse aid designedspecifically for dishwashers.1. Open the lid (C).2. Fill the dispenser (B)

4. Press Start to start the programme.• The indicator of the runningphase is on.• The programme duration starts todecrease with steps of 1 minute.Star

• Always use the whole space of thebaskets.• Make sure that items in the basketsdo not touch or cover each other.Only then can the water completelyrea

10.6 Unloading the baskets1. Let the tableware cool down beforeyou remove it from the appliance.Hot items can be easily damaged.2. First remove items

7. Reassemble the filters (B) and (C).8. Put back the filter (B) in the flat filter(A). Turn it clockwise until it locks.CAUTION!An incorrect position

11.4 Internal cleaning• Carefully clean the appliance,including the rubber gasket of thedoor, with a soft damp cloth.• To maintain the performance of

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

Problem and alarm code Possible cause and solutionThe anti-flood device is on.The display shows .• Close the water tap and contact an Authorised Serv

12.1 The washing and drying results are not satisfactoryProblem Possible cause and solutionPoor washing results. • Refer to "Daily use", &qu

Problem Possible cause and solutionThere are residues of deter-gent in the dispenser at theend of the programme.• The detergent tablet got stuck in th

Power consumption Left-on mode (W) 5.0Off-mode (W) 0.501) Refer to the rating plate for other values.2) If the hot water comes from alternative source

www.aeg.com/shop117879621-A-232018

manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa

• If the supply cord is damaged, it must be replaced bythe manufacturer, its Authorised Service Centre orsimilarly qualified persons in order to avoid

fuse, use only a 13 A ASTA (BS 1362)fuse.2.3 Water connection• Do not cause damage to the waterhoses.• Before connection to new pipes,pipes not used f

3. PRODUCT DESCRIPTION65911 10 7812 13 34211Worktop2Top spray arm3Upper spray arm4Lower spray arm5Filters6Rating plate7Salt container8Air vent9Rinse a

4. CONTROL PANEL12 4 568371On/off button2Program button3Programme indicators4Display5Delay button6Option button7Indicators8Start button4.1 IndicatorsI

5. PROGRAMMESThe order of the programmes in thetable may not reflect their sequence onthe control panel.Programme Degree of soilType of loadProgramme

5.1 Consumption valuesProgramme 1)Water(l)Energy(kWh)Duration(min)11 0.950 2358 - 15 0.7 - 1.7 46 - 17012.5 - 14.5 1.4 - 1.7 170 - 19012 - 14 0.8 - 1.